How To Take The Back Off An Iphone 8

Teardown difficulty:
Hard

Duration:
17 min

Recommended tools

Heat gun

Screwdriver Five-point P0.8 mm

Screwdriver Tri-point Y00

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly of the mobile device Apple iPhone 8 Plus (Apple iPhone 8 Plus A1864, A1897, A1898) with each step description and the required set of tools.

---

Vadim Popoff

Author, Content manager

Specialist in content creation, distribution and content management.

---

Step 1.

Using the key tool, open the SIM card slot and remove it.

⚠️ Warning!

Do not push too hard this may cause damage.

Step 2.

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew the 2 bolts on the end of the phone.

Step 3.

Step 4.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the bracket holds the connectors.

Step 5.

Using a screwdriver (Tri-Wing Precision Screwdriver 0.6mm), unscrew 2 bolts and remove the bracket holds the connectors.

Step 6.

Disconnect connectors and remove the display.

Step 7.

Using a screwdriver (Tri-Wing Precision Screwdriver 0.6mm), unscrew 2 bolts and remove the bracket holds the connectors.

Step 8.

Disconnect connector on the PCB.

Step 9.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the bracket holds the battery connector.

Step 10.

Disconnect the battery connector.

⚠️ Warning!

We strongly recommend disconnecting the connector to avoid a possible short circuit during disassembly.

Step 11.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolt and remove the bracket holds cameras.

Step 12.

Disconnect connectors on the PCB and remove the cameras.

Step 13.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the Wi Fi antenna.

Step 14.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 4 bolts and remove the part Wi Fi antenna.

Step 15.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 2 bolts and remove the antenna part.

Step 16.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 5 bolts in the PCB.

Step 17.

Step 18.

Parts in the back cover (housing).

Detailed disassembly instructions of Apple iPhone 8 Plus in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

---

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 17 minutes in time.
Our manual is suitable for all models Apple iPhone 8 Plus — Apple iPhone 8 Plus A1864, A1897, A1898 released for markets in different countries.

---

---

Back to the list

How To Take The Back Off An Iphone 8

Source: https://vrm24.com/instructions/how-to-disassemble-apple-iphone-8-plus/

Posted by: dexterworly1999.blogspot.com

Share this post